Toyota 4Runner manuals

Toyota 4Runner: Defogging the windshield


The air conditioning system operates automatically.

The air intake is automatically switched to outside air mode. It is not possible to return to recirculated air mode when the switch is on.

Adjusting the settings manually
Basic setting To turn on the air conditioning system and adjust the fan speed, press “>” on to increase the fan speed and “<” to decrease the fan speed. Press to turn the fan o ...

Adjusting the position of and opening and closing the air outlets
Front center outlets 1. Direct air flow to the left or right, up or down. 2. Turn the knob to open or close the vent. Front side outlets 1. Direct air flow to the left or right, up or down. 2 ...

Other materials about Toyota 4Runner:

Terminals Of Ecu
TERMINALS OF ECU 1. CHECK AIR CONDITIONING AMPLIFIER ASSEMBLY (a) Disconnect the F42 air conditioning amplifier connector. (b) Measure the voltage and resistance according to the value(s) in the table below. Terminal No. (Symbol) ...

INSTALLATION CAUTION / NOTICE / HINT HINT: A bolt without a torque specification is shown in the standard bolt chart (See page ). PROCEDURE 1. INSTALL FRONT BUMPER BRACKET SUB-ASSEMBLY LH (a) Install the front bumper bracket sub-assembly LH with the 2 ...

© 2016-2021 |