Toyota 4Runner manuals

Toyota 4Runner: Precaution

PRECAUTION

CAUTION:

Care must be taken to replace each part properly as it could affect the performance of the brake system and result in a driving hazard. Replace the parts with parts having the same part number or equivalent.

NOTICE:

  • It is very important to keep parts and the area clean when repairing the brake system.
  • If the vehicle is equipped with a mobile communication system, refer to the Precaution in the Introduction section.
Brake System
...

Problem Symptoms Table
PROBLEM SYMPTOMS TABLE HINT: Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order ...

Other materials about Toyota 4Runner:

Reassembly
REASSEMBLY CAUTION / NOTICE / HINT NOTICE: When installing parts, coat the parts indicated by arrows with power steering fluid (See page ). PROCEDURE 1. INSTALL VANE PUMP HOUSING OIL SEAL (a) Coat the lip of a new vane pump housing oil seal with MP gr ...

On-vehicle Inspection
ON-VEHICLE INSPECTION PROCEDURE 1. INSPECT BRAKE PEDAL LOAD SENSING SWITCH HINT: Do not remove the brake pedal load sensing switch from the brake pedal lever sub-assembly. When there is a malfunction in the brake pedal load sensing switch, ...

© 2016-2025 | www.to4runner.net

0.0069