Toyota 4Runner manuals

Toyota 4Runner: System Description

SYSTEM DESCRIPTION

1. GENERAL DESCRIPTION

(a) By operating the seat heater switch, which is located in the console box, the seat temperature can be controlled within the range of 30 to 40°C (86 to 104°F).

(b) The seat heater switch indicator light indicates the seat heater on/off status.

(c) The seat heaters of both seats are controlled by the seat heater control sub-assemblies, which are located under the respective seat.

System Diagram
SYSTEM DIAGRAM ...

Problem Symptoms Table
PROBLEM SYMPTOMS TABLE HINT: Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are lis ...

Other materials about Toyota 4Runner:

Reassembly
REASSEMBLY CAUTION / NOTICE / HINT NOTICE: When installing parts, coat the parts indicated by arrows with power steering fluid (See page ). PROCEDURE 1. INSTALL VANE PUMP HOUSING OIL SEAL (a) Coat the lip of a new vane pump housing oil seal with MP gr ...

Removal
REMOVAL CAUTION / NOTICE / HINT HINT: Use the same procedure for the RH and LH sides. The procedure listed below is for the LH side. PROCEDURE 1. REMOVE REAR NO. 2 SEAT ASSEMBLY (a) Remove the rear No. 2 seat assembly (See page ). 2. ...

© 2016-2020 | www.to4runner.net

0.0093