Toyota 4Runner: Components

Valve Body Assembly

...

Removal

REMOVAL PROCEDURE 1. DRAIN AUTOMATIC TRANSMISSION FLUID 2. REMOVE AUTOMATIC TRANSMISSION OIL PAN SUB-ASSEMBLY 3. REMOVE VALVE BODY OIL STRAINER ASSEMBLY 4. DISCONNECT TRANSMISSION WIRE ...

Other materials about Toyota 4Runner:

Installation
INSTALLATION CAUTION / NOTICE / HINT HINT: Use the same procedure for the RH and LH sides. The procedure listed below is for the LH side. PROCEDURE 1. INSTALL REAR AXLE SHAFT OIL SEAL LH (a) Using SST and a hammer, install a ...

Reassembly
REASSEMBLY PROCEDURE 1. INSTALL LOWER BALL JOINT DUST COVER LH (a) Pack the lower arm ball joint with MP grease. Grease capacity: 8.0 g (0.282 oz.) (b) Apply MP grease to the locations shown in the illustration. Text in Illustration ...