Toyota 4Runner: Connecting trailer lights
Use the wire harness stored in the rear end under body.
Service connector for towing brake controller
Your vehicle is equipped with a service connector for the trailer brake controller as shown.
Selecting trailer ball
Use the correct trailer ball for your application.
1. Trailer ball load rating Matches or exceeds the gross trailer weight
rating of the trailer.
2. Ball diameter Matches the size of the trailer ...
Trailer towing tips
Your vehicle will handle differently when towing a trailer. Help to avoid an
accident, death or serious injury, keep the following in mind when towing:
• Speed limits for towing a trailer vary by ...
Other materials about Toyota 4Runner:
Reverse Signal Circuit
DESCRIPTION
The radio and display receiver assembly receives a reverse signal from the park/neutral
position switch assembly.
WIRING DIAGRAM
PROCEDURE
1.
CHECK HARNESS AND CONNECTOR (REVERSE SIGNAL)
(a) Disconnect the G ...
Yaw Rate Sensor Communication Stop Mode
DESCRIPTION
Detection Item
Symptom
Trouble Area
Yaw Rate Sensor Communication Stop Mode
Either condition is met:
"Yaw Rate / Deceleration Sensor" is not displayed on the &quo ...
0.0082