DESCRIPTION
This DTC is output when the VSC system detects a malfunction in the ABS.
DTC Code |
DTC Detection Condition |
Trouble Area |
---|---|---|
43 |
A malfunction in the anti-lock brake system. |
Anti-lock brake system |
CAUTION / NOTICE / HINT
NOTICE:
When replacing the master cylinder solenoid, perform calibration (See page ).
PROCEDURE
1. |
CHECK ANTI-LOCK BRAKE SYSTEM |
(a) Clear the DTCs (See page ).
(b) Turn the ignition switch off.
(c) Turn the ignition switch to ON.
(d) Check if an ABS DTC is output (See page
).
Result |
Proceed to |
---|---|
DTC (ABS DTC) is not output |
A |
DTC (ABS DTC) is output |
B |
B |
REPAIR CIRCUITS INDICATED BY OUTPUT DTCS |
|
2. |
CONFIRM DTC |
(a) Clear the DTCs (See page ).
(b) Turn the ignition switch off.
(c) Turn the ignition switch to ON.
(d) Check if the same DTC is output (See page
).
Result |
Proceed to |
---|---|
DTC is not output |
A |
DTC is output |
B |
A |
USE SIMULATION METHOD TO CHECK |
B |
REPLACE MASTER CYLINDER SOLENOID |
Rear Occupant Classification Sensor LH Collision Detection (B1787)
DESCRIPTION
DTC B1787 is stored when the occupant classification ECU receives a collision
detection signal, which is sent by the rear occupant classification sensor LH when
an accident occurs.
DTC B1787 is also stored when the separate type front seat cu ...
Installation
INSTALLATION
CAUTION / NOTICE / HINT
HINT:
When installing the symbol emblem, No. 1 back door emblem and No. 1 roof side
mark, heat the vehicle body, symbol emblem, No. 1 back door emblem and No. 1 roof
side mark using a heat light.
Standard:
...