Toyota 4Runner manuals

Toyota 4Runner: Adjusting the settings

Basic setting

To turn on the air conditioning
system and adjust the fan speed, turn the fan speed control knob clockwise (increase) or counterclockwise (decrease).

Turning the knob to “OFF” turns off the fan.

To adjust the temperature
setting, turn the temperature control knob clockwise (warm) or counterclockwise (cool).

If is not pressed, the system
will blow ambient temperature air or heated air.

For quick cooling, turn the temperature control knob to “MAX A/C”.

The air conditioning will automatically turn on and, if an air outlet position other than or
is selected, the system will be set
to recirculated air mode. While “MAX A/C” is selected, it is not possible to turn off the air conditioning.

To select the air outlets, set
the air outlet selector knob to the desired position.

The positions between the air outlet selections shown below can also be selected for more delicate adjustment.


Air flows to the upper body.


Air flows to the upper body and feet.


Mainly air flows to the feet.


Air flows to the feet and the windshield defogger operates.

The air intake is automatically switched to outside air mode.

Pressing to turn the cooling and
dehumidification function on clears the windshield and side windows faster.


Air flows to the windshield and side windows.

The air intake is automatically switched to outside air mode. It is not possible to return to recirculated air mode when the switch is on.

Pressing  to turn the
cooling and dehumidification function on clears the windshield and side windows faster.

Switching between outside air and recirculated air modes

Press .


The mode switches between outside air mode (introduces air from outside the vehicle) (indicator off) and recirculated air mode (recycles air inside the vehicle) (indicator on) each time the button is pressed.

Manual air conditioning system
...

Adjusting the position of and opening and closing the air outlets
Front center outlets 1. Direct air flow to the left or right, up or down. 2. Turn the knob to open or close the vent. Front side outlets 1. Direct air flow to the left or right, up or down. 2 ...

Other materials about Toyota 4Runner:

Accumulator Low Pressure (C1256)
DESCRIPTION Refer to DTC C1254 (See page ). DTC Code DTC Detection Condition Trouble Area C1256 The fluid pressure inside the accumulator is below the standard value. Brake b ...

Installation
INSTALLATION PROCEDURE 1. INSTALL CENTER CONTROL ABSORBER BRACKET LH (a) Install the center control absorber bracket with the 2 bolts. Torque: 29 N·m {296 kgf·cm, 21 ft·lbf} 2. INSTALL CENTER CONTROL ABSORBER BRACKET RH HINT: Use the same procedure ...

© 2016-2024 | www.to4runner.net

0.0071