ADJUSTMENT
PROCEDURE
1. ADJUST PARK/NEUTRAL POSITION SWITCH ASSEMBLY
(a) Loosen the bolt of the park/neutral position switch and move the shift lever to the N position. |
|
(b) Align the neutral basic line with the switch groove.
(c) Hold the switch in position and tighten the bolt.
Torque:
13 N·m {130 kgf·cm, 9 ft·lbf}
Text in Illustration
*1 |
Neutral Basic Line |
*2 |
Groove |
(d) After the adjustment, perform the on-vehicle inspection (See page ).
Reassembly
REASSEMBLY
PROCEDURE
1. INSTALL FOG LIGHT ASSEMBLY LH
2. INSTALL FOG LIGHT ASSEMBLY RH
HINT:
Use the same procedure as for the LH side.
3. INSTALL FRONT BUMPER MOULDING SUB-ASSEMBLY
(a) Attach the 4 claws and 12 guides to install the front bumper mou ...
Removal
REMOVAL
PROCEDURE
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-)
battery terminal to disable the SRS system.
NOTICE:
When disconnecting the cable, some systems ne ...