ADJUSTMENT
PROCEDURE
1. INSPECT SHIFT LEVER POSITION
(a) When moving the shift lever from P to R with the ignition switch to on (IG) and the brake pedal depressed, make sure that it moves smoothly and correctly into position.
(b) Check that the shift lever does not stop when moving the shift lever from R to P, and check that the shift lever does not stick when moving the shift lever from D to S.
(c) Start the engine and make sure that the vehicle moves forward after moving the shift lever from N to D and moves in reverse after moving the shift lever to R.
If the operation cannot be performed as specified, inspect the park/neutral position switch assembly and check the transmission floor shift assembly installation condition.
2. ADJUST SHIFT LEVER POSITION
(a) Remove the rear console box (See page ).
(b) Move the shift lever to N.
(c) Slide the slider in the direction shown in the illustration and pull out the lock piece. Text in Illustration
|
|
(d) Push the lock piece into the adjuster case and lock it. NOTICE: Make sure that the lock piece is completely locked by the slider. |
|
(e) Install the rear console box (See page ).
Shift Solenoid "B" Control Circuit Low (Shift Solenoid Valve S2) (P0976,P0977)
DESCRIPTION
Shifting from 1st to 5th is performed in combination with the ON and OFF operation
of the shift solenoid valves SL1, SL2, S1, S2 and SR, which is controlled by the
ECM. If an open or short circuit occurs in one of the shift solenoid valves, th ...
Radio Broadcast cannot be Received or Poor Reception
PROCEDURE
1.
CHECK RADIO AND DISPLAY RECEIVER ASSEMBLY
(a) Check the radio automatic station search function.
(1) Check the radio automatic station search function by activating it.
Result
Proceed to
...