Components
COMPONENTS
ILLUSTRATION
Removal
REMOVAL
PROCEDURE
1. REMOVE ROOF HEADLINING ASSEMBLY
(See page )
2. REMOVE AMPLIFIER ANTENNA ASSEMBLY
(a) Disconnect the 3 connectors. |
|
(b) Remove the clip. |
|
(c) Remove the bolt and amplifier antenna assembly.
Installation
INSTALLATION
PROCEDURE
1. INSTALL AMPLIFIER ANTENNA ASSEMBLY
(a) Install the amplifier antenna assembly with the bolt and clip.
Torque:
7.0 N·m {71 kgf·cm, 62 in·lbf}
(b) Connect the 3 connectors.
2. INSTALL ROOF HEADLINING ASSEMBLY
(See page )
Removal
REMOVAL
CAUTION / NOTICE / HINT
HINT:
Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
PROCEDURE
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after d ...
Customize Parameters
CUSTOMIZE PARAMETERS
1. CUSTOMIZING FUNCTION WITH TECHSTREAM
HINT:
The following items can be customized.
NOTICE:
When the customer requests a change in a function, first make sure that
the function can be customized.
Be sure to make a not ...