Toyota 4Runner: Black Screen

Toyota 4Runner Service Manual / Audio / Visual / Telematics / Navigation / Multi Info Display / Navigation System / Black Screen

PROCEDURE

1.	CHECK DISPLAY SETTING

(a) Check that the display is not in screen off mode.

OK:

The display setting is not in screen off mode.

CHANGE SCREEN TO SCREEN ON MODE

2.	CHECK IMAGE QUALITY SETTING

(a) Check that the screen color quality can be set.

OK:

Setting is possible.

SET SCREEN COLOR QUALITY TO NORMAL

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE

USB Audio System Recognition/Play Error

DESCRIPTION When a USB device or "iPod" is connected to the USB jack of the No. 1 stereo jack adapter assembly, it must have playable files. The device must also communicate with and be ...

Steering Pad Switch Circuit

DESCRIPTION This circuit sends an operation signal from the steering pad switch assembly to the navigation receiver assembly. If there is an open in the circuit, the audio system cannot be operate ...

Other materials about Toyota 4Runner:

Side Auto Step Switch Circuit
DESCRIPTION The side auto step controller ECU assembly receives the door open/closed signal from each door courtesy light switch via the side auto step switch assembly. WIRING DIAGRAM CAUTION / NOTICE / HINT HINT: Inspection should be performed on the ...

Customize Parameters
CUSTOMIZE PARAMETERS 1. CUSTOMIZING FUNCTION WITH THE TECHSTREAM HINT: The following items can be customized. NOTICE: When the customer requests a change in a function, first make sure that the function can be customized. Record the curren ...