Components
COMPONENTS
ILLUSTRATION
ILLUSTRATION
Removal
REMOVAL
PROCEDURE
1. REMOVE AIR CONDITIONING UNIT
(a) Remove the air conditioning unit (See page ).
2. REMOVE BLOWER ASSEMBLY
(a) Remove the screw. |
|
(b) Disconnect the connector and detach the clamp.
(c) Detach the 2 claws and remove the blower unit.
Disassembly
DISASSEMBLY
PROCEDURE
1. REMOVE DAMPER SERVO SUB-ASSEMBLY
(a) Remove the 3 screws and damper servo sub-assembly.
2. REMOVE BLOWER WITH FAN MOTOR SUB-ASSEMBLY
(a) Remove the 3 screws and motor.
3. REMOVE AIR FILTER
(a) Detach the 2 claws and remove the filter.
(b) Remove the filter case.
Reassembly
REASSEMBLY
PROCEDURE
1. INSTALL AIR FILTER
(a) Install the filter.
(b) Attach the 2 claws to install the filter case.
2. INSTALL BLOWER WITH FAN MOTOR SUB-ASSEMBLY
(a) Install the motor with the 3 screws.
3. INSTALL DAMPER SERVO SUB-ASSEMBLY
(a) Install the damper servo with the 3 screws.
Installation
INSTALLATION
PROCEDURE
1. INSTALL BLOWER ASSEMBLY
(a) Attach the 2 claws to install the blower unit.
(b) Connect the connector and attach the clamp.
(c) Install the screw.
Torque:
2.7 N·m {28 kgf·cm, 24 in·lbf}
2. INSTALL AIR CONDITIONING UNIT
(a) Install the air conditioning unit (See page ).
Disassembly
DISASSEMBLY
PROCEDURE
1. REMOVE COOLER BRACKET
(a) Detach the clamp.
(b) Remove the screw and cooler bracket.
2. REMOVE MAGNET CLUTCH ASSEMBLY
(a) Clamp the cooler compressor in a vise.
(b) Using SST, hold the magnet clutch hub.
SST: 07112-76060
( ...
Operation Check
OPERATION CHECK
1. CHECK KEY REMINDER WARNING SYSTEM
(a) Check that the key reminder warning buzzer sounds.
(1) With the driver side door closed, insert the key into the ignition key cylinder
and leave the ignition switch off, or turn the ignition switch ...