PROCEDURE
1. |
CHECK USAGE CONDITION |
(a) Check that the vehicle and cellular phone meet the following conditions:
NOTICE:
If changing cellular phone settings, updating software, etc. is necessary, make sure to obtain the permission of the customer before performing it.
(b) Connect the cellular phone to the in-vehicle device and check that it is connected correctly.
Result |
Proceed to |
---|---|
The cellular phone is connected correctly. |
A |
The cellular phone is not connected correctly. |
B |
A |
END |
|
2. |
RESTART CELLULAR PHONE |
(a) Restart the cellular phone.
(b) Turn the ignition switch off.
(c) Turn the ignition switch to ACC.
(d) Connect the cellular phone to the in-vehicle device and check that it is connected correctly.
Result |
Proceed to |
---|---|
The cellular phone is connected correctly. |
A |
The cellular phone is not connected correctly. |
B |
A |
END |
|
3. |
CHECK OPERATION |
(a) Check if the in-vehicle device can be recognized by the cellular phone.
Result |
Proceed to |
---|---|
In-vehicle device can be recognized. |
A |
In-vehicle device cannot be recognized. |
B |
B |
GO TO STEP 5 |
|
4. |
REGISTER AGAIN |
(a) Clear all "Bluetooth" devices registered to the cellular phone and radio and display receiver assembly.
(b) Register the cellular phone again.
(c) Connect the cellular phone to the in-vehicle device and check that it is connected correctly.
Result |
Proceed to |
---|---|
The cellular phone is connected correctly. |
A |
The cellular phone is not connected correctly. |
B |
A |
END |
|
5. |
CHECK USING ANOTHER VEHICLE |
(a) Check if the customer's cellular phone functions normally using another "Bluetooth" compatible vehicle.
NOTICE:
Result |
Proceed to |
---|---|
The cellular phone is connected correctly. |
A |
The cellular phone is not connected correctly. |
B |
A |
PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE |
|
6. |
CHECK USING ANOTHER CELLULAR PHONE |
(a) Check if the system functions normally using another "Bluetooth" compatible cellular phone.
NOTICE:
Result |
Proceed to |
---|---|
The cellular phone is connected correctly. |
A |
The cellular phone is not connected correctly. |
B |
A |
END (ONLY A "Bluetooth" COMPATIBLE CELLULAR PHONE CAN BE USED) |
B |
PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE |
ACC Signal Circuit
DESCRIPTION
This circuit detects the ignition switch ACC or off condition, and sends it to
the main body ECU.
WIRING DIAGRAM
CAUTION / NOTICE / HINT
NOTICE:
Inspect the fuses for circuits related to this system before performing the following
inspec ...
Entry Interior Alarm does not Sound
DESCRIPTION
The smart key system uses the combination meter buzzer to perform various vehicle
interior warnings. When the conditions of each warning are met, the certification
ECU sends a buzzer signal to the combination meter assembly, and the combinatio ...