Toyota 4Runner: Cellular Phone Registration Failure

Toyota 4Runner Service Manual / Audio / Visual / Telematics / Navigation / Multi Info Display / Navigation System / Cellular Phone Registration Failure

CAUTION / NOTICE / HINT

NOTICE:

After replacing the navigation receiver assembly of vehicles subscribed to pay-type satellite radio broadcasts, XM radio ID registration is necessary.

HINT:

If the operation of a cellular phone or the navigation receiver assembly is requested, make sure to follow the instructions closely and perform the operation.

PROCEDURE

1.	CHECK USAGE CONDITION

(a) Check that the vehicle and cellular phone meet the following conditions:

HINT:

If changing cellular phone settings, updating software, etc. is necessary, make sure to obtain the permission of the customer before performing it.

The cellular phone is "Bluetooth" compatible (Refer to http://www.toyota.com/entune/enside.html).
"Bluetooth" setting of the cellular phone is on.
Operating system and software of the cellular phone are the latest versions.
There are no other radio wave emitting devices ("Wi-Fi" communication device, etc.) in the cabin.

(b) Register the cellular phone again and check if it is registered correctly.

HINT:

If operation of the cellular phone or navigation receiver assembly is requested, make sure to follow the instructions closely and perform the operation.

OK:

The cellular phone is registered correctly.

END (USAGE CONDITION IS DEFECTIVE)

2.	RESTART CELLULAR PHONE

(a) Turn the ignition switch off.

(b) Turn the ignition switch to ACC.

HINT:

If operation of the cellular phone or navigation receiver assembly is requested, make sure to follow the instructions closely and perform the operation.

OK:

The cellular phone is registered correctly.

END (TEMPORARY MALFUNCTION WITH "Bluetooth" OF CELLULAR PHONE)

3.	CHECK BRING CELLULAR PHONE NEAR IN-VEHICLE DEVICE

(a) Place the cellular phone close to the navigation receiver assembly.

(b) Register the cellular phone as a connected device again and check if it is registered correctly.

HINT:

If operation of the cellular phone or navigation receiver assembly is requested, make sure to follow the instructions closely and perform the operation.

OK:

The cellular phone is registered correctly.

END (TEMPORARY MALFUNCTION WITH "Bluetooth")

4.	CLEAR REGISTERED DEVICE INFORMATION

(a) Clear all "Bluetooth" devices registered to the cellular phone and navigation receiver assembly.

(b) Register the cellular phone as a connected device again and check if it is registered correctly.

HINT:

If operation of the cellular phone or navigation receiver assembly is requested, make sure to follow the instructions closely and perform the operation.

OK:

The cellular phone is registered correctly.

END (TEMPORARY MALFUNCTION WITH "Bluetooth")

5.	CHECK USING ANOTHER VEHICLE

(a) Check if the cellular phone can be registered normally to another "Bluetooth" audio compatible vehicle of the same model.

HINT:

Make sure to obtain the customer's permission to perform this procedure.
After the inspection, clear the registered information and usage history acquired during the inspection.
If operation of the cellular phone or navigation receiver assembly is requested, make sure to follow the instructions closely and perform the operation.

OK:

The cellular phone is registered correctly.

REPLACE NAVIGATION RECEIVER ASSEMBLY

6.	CHECK USING ANOTHER CELLULAR PHONE

(a) Using another "Bluetooth" compatible cellular phone, register the cellular phone and check that it is registered correctly.

HINT:

Make sure to obtain the customer's permission to perform this procedure.
After the inspection, clear the registered information and usage history acquired during the inspection.
If operation of the cellular phone or navigation receiver assembly is requested, make sure to follow the instructions closely and perform the operation.

OK:

The cellular phone is registered correctly.

END (ONLY A "Bluetooth" COMPATIBLE CELLULAR PHONE CAN BE USED)

REPLACE NAVIGATION RECEIVER ASSEMBLY

Voice is not Recognized

CAUTION / NOTICE / HINT NOTICE: After replacing the navigation receiver assembly of vehicles subscribed to pay-type satellite radio broadcasts, registration of the XM radio ID is necessary. PROCE ...

Cellular Phone Inspection

CAUTION / NOTICE / HINT HINT: If the operation of a cellular phone or the navigation receiver assembly is requested, make sure to follow the instructions closely and perform the operation. PROCED ...

Other materials about Toyota 4Runner:

Short in CAN Bus Lines
DESCRIPTION There may be a short circuit between the CAN bus lines when the resistance between terminals 6 (CANH) and 14 (CANL) of the DLC3 is below 54 Ω. Symptom Trouble Area The resistance between terminals 6 (CANH ...

Rear Power Window RH Auto Up / Down Function does not Operate with Rear Power Window Switch RH
DESCRIPTION If the auto up/down function does not operate, the cause may be one or more of the following: The ECU in the power window regulator motor determines that the power window regulator motor has not been initialized. The rear power w ...