1. Adjusts the hours
2. Adjusts the minutes
For quicker adjustment of the clock
To advance the minutes and hours quickly, press and hold the “M” or “H” button.
The time can be adjusted back or forth by following the procedure below:
The hour or minute can be moved forward or backward by pressing the “MODE/
” or “SET/
” button while pressing and holding
the “H” or “M” button.
If the “MODE/ ” or “SET/
” button is also pressed and held in
the above operation, the hour or minute will move faster.
The clock is displayed when Vehicles without a smart key system
The engine switch is in the “ACC” or “ON” position.
Vehicles with a smart key system
The “ENGINE START STOP” switch is in ACCESSORY or IGNITION ON mode.
When disconnecting and reconnecting battery terminals
The clock data will be reset.
Installation
INSTALLATION
PROCEDURE
1. TEMPORARILY INSTALL FRONT STABILIZER LINK ASSEMBLY RH
(a) Temporarily install the front stabilizer link assembly with the bolt.
HINT:
Make sure that the identification mark on the front stabilizer link assembly
...
Front Differential Side Gear Shaft Oil Seal(for 4wd)
Components
COMPONENTS
ILLUSTRATION
Replacement
REPLACEMENT
CAUTION / NOTICE / HINT
HINT:
Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
PROCEDURE
1. REMOVE FRONT DRIVE SHAFT ASSEM ...