Toyota 4Runner: Components

Stabilizer Control Valve(w/ Kdss)

...

Installation

INSTALLATION PROCEDURE 1. INSTALL STABILIZER CONTROL WITH ACCUMULATOR HOUSING ASSEMBLY (a) Install the stabilizer control with accumulator housing with the 3 bolts. Torque: 29 N·m {296 kgf·cm, ...

Other materials about Toyota 4Runner:

Evaporator Temperature Sensor Circuit (B1413)
DESCRIPTION The No. 1 cooler thermistor is installed on the evaporator in the air conditioning unit to detect the temperature of the cooled air that has passed through the evaporator and control the air conditioning. It sends appropriate signals to the No ...

Inspection
INSPECTION PROCEDURE 1. INSPECT PROPELLER SHAFT ASSEMBLY (a) Using a dial indicator, check the propeller shaft runout. Maximum runout: 0.4 mm (0.0157 in.) If the shaft runout is more than the maximum, replace the shaft. ...