Toyota 4Runner: Components

Side Moulding

...

Disassembly

DISASSEMBLY CAUTION / NOTICE / HINT HINT: Use the same procedure for the RH and LH sides. The procedure listed below is for the LH side. PROCEDURE 1. REMOVE FRONT FENDER OUTSIDE ...

Other materials about Toyota 4Runner:

Inspection
INSPECTION PROCEDURE 1. INSPECT LEVEL WARNING SWITCH ASSEMBLY HINT: The following check should be performed with the windshield washer motor and pump installed to the washer jar. (a) Fill the washer jar with washer fluid. (b) Measure the res ...

Installation
INSTALLATION PROCEDURE 1. INSTALL SLIDING ROOF HOUSING SUB-ASSEMBLY (a) Temporarily install the housing with the 8 bolts (vehicle body side) and 8 nuts. (b) Tighten the 8 nuts in alphabetical order. Torque: 5.5 N·m {56 kgf·cm, 49 in·lbf} (c) Tight ...