Toyota 4Runner: Components

Rear No. 1 Seat Assembly(for 60/40 Split Slide Walk-in Seat Type Rh Side)

...

Removal

REMOVAL CAUTION / NOTICE / HINT CAUTION: Wear protective gloves. Sharp areas on the parts may injure your hands. PROCEDURE 1. REMOVE REAR SEAT HEADREST ASSEMBLY (a) Remove the headrest. 2. REMO ...

Other materials about Toyota 4Runner:

Disassembly
DISASSEMBLY PROCEDURE 1. REMOVE FRONT NO. 1 LOWER ARM BUSH LH (a) Using a chisel and hammer, pry the flange of the bush outward. (b) Using SST and a press, press out the bush. SST: 09632-36 ...

Reverse Signal Circuit
DESCRIPTION The radio and display receiver assembly receives a reverse signal from the park/neutral position switch assembly. WIRING DIAGRAM PROCEDURE 1. CHECK HARNESS AND CONNECTOR (REVERSE SIGNAL) (a) Disconnect the G ...