Toyota 4Runner: Components

Seat Heater Switch

...

Inspection

INSPECTION PROCEDURE 1. INSPECT SEAT HEATER SWITCH LH (a) Measure the resistance according to the value(s) in the table below. Standard Resistance: Tester Connection Sw ...

Other materials about Toyota 4Runner:

Reassembly
REASSEMBLY PROCEDURE 1. INSTALL FRONT DRIVE SHAFT DUST COVER (a) Using SST and a press, install a new dust cover. SST: 09527-10011 2. INSTALL SHAFT SNAP RING (a) Install a new snap ring. 3. INSTALL OUTBOARD JOINT BOOT HINT: Before installing the ...

Installation
INSTALLATION PROCEDURE 1. INSTALL STABILIZER CONTROL WITH ACCUMULATOR HOUSING ASSEMBLY (a) Install the stabilizer control with accumulator housing with the 3 bolts. Torque: 29 N·m {296 kgf·cm, 21 ft·lbf} (b) Connect the connector, and then attach the ...