COMPONENTS
ILLUSTRATION
ILLUSTRATION
ILLUSTRATION
ILLUSTRATION
ILLUSTRATION
On-vehicle InspectionInstallation
INSTALLATION
PROCEDURE
1. INSTALL REAR FLOOR SIDE AIRBAG SENSOR
(a) Turn the ignition switch off.
(b) Disconnect the cable from the negative (-) battery terminal.
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-)
bat ...
Transmitter ID not Registered (C2171/71)
DESCRIPTION
The ID of each tire pressure warning valve and transmitter is registered to the
tire pressure warning ECU.
When the ECU detects that a transmitter ID code is not registered in the ECU,
this DTC is stored.
DTC Code
Detec ...