COMPONENTS
ILLUSTRATION
Installation
INSTALLATION
PROCEDURE
1. INSTALL TORQUE CONVERTER CLUTCH ASSEMBLY
(a) Using a vernier caliper and straightedge, measure dimension "A" between the
transmission fitting surface of the engine*1 and the torque converter clutch fitting
surface o ...
Removal
REMOVAL
PROCEDURE
1. REMOVE UPPER RADIATOR SUPPORT SEAL
2. REMOVE FRONT BUMPER COVER
(a) Put protective tape around the front bumper cover.
(b) Remove the 3 bolts, 10 screws and 6 clips.
(c) Detach the 14 claws to remove the front bumper cover with ra ...