Toyota 4Runner manuals

Toyota 4Runner: Crawl Indicator Light Remains ON

DESCRIPTION

Refer to Crawl Indicator Light does not Come ON (See page ).


WIRING DIAGRAM

Refer to Crawl Indicator Light does not Come ON (See page ).


CAUTION / NOTICE / HINT

NOTICE:

When replacing the master cylinder solenoid, perform calibration (See page ).


PROCEDURE

1.

READ VALUE USING TECHSTREAM (CRAWL CONTROL LIGHT)



A

REPLACE MASTER CYLINDER SOLENOID

B

2.

READ VALUE USING TECHSTREAM (CRAWL CONTROL MAIN SWITCH)



OK

GO TO METER / GAUGE SYSTEM (HOW TO PROCEED WITH TROUBLESHOOTING)


NG

REPLACE DRIVE MONITOR SWITCH

ABS Warning Light does not Come ON
DESCRIPTION Refer to ABS Warning Light Remains ON (See page ). WIRING DIAGRAM Refer to ABS Warning Light Remains ON (See page ). CAUTION / NOTICE / HINT NOTICE: When replacing the master cyl ...

Crawl Indicator Light does not Come ON
DESCRIPTION If any of the following conditions are met, the crawl indicator light blinks and crawl control is stopped. Crawl control is operated when the vehicle stability control system ...

Other materials about Toyota 4Runner:

Precaution
PRECAUTION 1. IGNITION SWITCH EXPRESSION HINT: The type of ignition switch used on this model differs according to the specifications of the vehicle. The expressions listed in the table below are used in this section. Expression Ign ...

Installation
INSTALLATION CAUTION / NOTICE / HINT HINT: Use the same procedure for the RH and LH sides. The procedure listed below is for the LH side. When installing the window frame moulding, black out tape and outside stripe, heat the vehicle body ...

© 2016-2022 | www.to4runner.net

0.1131