Components
COMPONENTS
ILLUSTRATION
Removal
REMOVAL
PROCEDURE
1. REMOVE DRIVE MONITOR SWITCH (CRAWL CONTROL SWITCH AND MULTI-TERRAIN SELECT SWITCH)
(a) Detach the 4 claws and remove the drive monitor switch (CRAWL control switch and multi-terrain select switch) from the map light assembly. |
|
(b) Disconnect the connector.
Installation
INSTALLATION
PROCEDURE
1. INSTALL DRIVE MONITOR SWITCH (CRAWL CONTROL SWITCH AND MULTI-TERRAIN SELECT SWITCH)
(a) Connect the connector.
(b) Attach the 4 claws to install the drive monitor switch (CRAWL control switch and multi-terrain select switch).
2. PERFORM CRAWL CONTROL CALIBRATION
(a) Perform crawl control calibration (See page ).
Lost Communication with Back Door Power Window ECU (Abnormal Power Supply) (B2327,B2328)
DESCRIPTION
DTC B2327 is stored when LIN communication between the multiplex network
door ECU (back door P/W) and back door power window regulator motor assembly
stops for 10 seconds or more.
DTC B2328 is stored when a malfunction in the LI ...
Problem Symptoms Table
PROBLEM SYMPTOMS TABLE
HINT:
Use the table below to help determine the cause of problem symptoms. If multiple
suspected areas are listed, the potential causes of the symptoms are listed in order
of probability in the "Suspected Area" column of ...