Toyota 4Runner manuals

Toyota 4Runner: Customize Parameters

CUSTOMIZE PARAMETERS

1. CUSTOMIZING FUNCTION WITH TECHSTREAM

HINT:

The following items can be customized.

NOTICE:

  • When the customer requests a change in a function, first make sure that the function can be customized.
  • Record the current settings before customizing.

(a) Connect the Techstream to the DLC3.

(b) Turn the ignition switch to ON.

(c) Turn the Techstream on.

(d) Enter the following menus: Customize Setting.

(e) Select the setting by referring to the table below.

Illuminated Entry

Display

Default

Content

Setting

Lighting Time

15s

Changes the lighting time after closing all of the doors. (It will fade out immediately in case of turning the ignition switch from off to ACC or ON).

7.5s, 15s or 30s

I/L when ACC OFF

ON

A function that turns on the lights when the ignition switch is turned from ON or ACC to off (the room light turns on when the interior light switch is set to DOOR).

ON or OFF

I/L ON W/Door Key Unlock*2

ON

A function that turns on the room light when the door is unlocked with the door key cylinder (the room light turns on when the map light switch is set to DOOR).

ON or OFF

Room Light when Aprchd*1

ON

A function that turns on the room light when the key is brought within the vehicle exterior detection area (the room light turns on when the map light switch is set to DOOR).

ON or OFF

Inside Foot Light*3

ON

Changes the interior foot lights control.

ON or OFF

Mirr-Foot-Lgt Approached*4

ON

Door mirror foot light (when approaching vehicle)

ON or OFF

Mirr-Foot-Lgt Unlocked*4

ON

Door mirror foot light (when unlocking doors)

ON or OFF

Mirror Foot Light Time*4

15s

Door mirror foot light illumination duration

0s, 7.5s, 15s or 30s

Light Control*5

ON

Changes the inside handle illumination control.

ON or OFF

Interior Light Control

ON

Changes the engine switch illumination*1 or ignition key cylinder light*2 control.

ON or OFF

Exterior Light Control*4

ON

Changes the door mirror foot light control.

ON or OFF

  • *1: w/ Smart Key System
  • *2: w/o Smart Key System
  • *3: w/ Interior Foot Light
  • *4: w/ Door Mirror Foot Light
  • *5: w/ Inside Handle Illumination
System Diagram
SYSTEM DIAGRAM ...

Operation Check
OPERATION CHECK 1. INSPECT ILLUMINATED ENTRY SYSTEM OPERATION NOTICE: Perform this inspection with the customize parameters at the initial setting. HINT: The illuminated entry system illuminates ...

Other materials about Toyota 4Runner:

Dtc Check / Clear
DTC CHECK / CLEAR 1. CHECK DTC (a) Turn the ignition switch off. (b) Connect the Techstream to the DLC3. (c) Turn the ignition switch to ON. (d) Turn the Techstream on. (e) Enter the following menus: Chassis / PPS / Trouble codes. (f) Read the DTCs foll ...

Disassembly
DISASSEMBLY PROCEDURE 1. REMOVE NO. 1 HEATER TO REGISTER DUCT (a) Remove the 4 screws and No. 1 heater to register duct. 2. REMOVE NO. 2 HEATER TO REGISTER DUCT (a) Remove the 4 screws and No ...

© 2016-2024 | www.to4runner.net

0.0231