Toyota 4Runner: Customize Parameters

Toyota 4Runner Service Manual / Vehicle Interior / Meter / Gauge / Display / Meter / Gauge System / Customize Parameters

CUSTOMIZE PARAMETERS

1. METER/GAUGE SYSTEM

(a) Combination Meter

NOTICE:

Record the current settings before customizing.
When the customer requests a change in a function, first make sure that the function can be customized.

HINT:

The following items can be customized using the Techstream.

Warning

Tester Display	Default	Content	Setting
Driver Side Seatbelt Warning Buzzer*	ON	Function to turn on or off the seat belt warning buzzer	ON or OFF
Front Passenger Side Seatbelt Warning Buzzer*	ON	Function to turn on or off the seat belt warning buzzer	ON or OFF

*: This setting is only valid for the buzzer which sounds at 20 km/h (12 mph) or more.

Display

Tester Display	Default	Content	Setting
ECO Drive Indicator Zone	ON	Function to enable or disable eco driving indicator zone display in the multi-information display	ON or OFF

System Diagram

SYSTEM DIAGRAM Terminal No. (Symbol) Wire Harness Side F14 1 (CANH) CAN communication line (V Bus) 2 (CANL) ...

Operation Check

OPERATION CHECK 1. INSPECT INDICATOR/WARNING LIGHT (a) Check the following indicators and warning lights. Indicator/Warning Light Switch Condition Specified Conditi ...

Other materials about Toyota 4Runner:

Lost Communication with Door Side Airbag Sensor RH (B1692/81,B1697/82)
DESCRIPTION The circuit for the side collision sensor LH or RH (to determine deployment of the front seat side airbag LH or RH and curtain shield airbag LH or RH) is composed of the center airbag sensor, rear airbag sensor LH or RH and side airbag sensor ...

Installation
INSTALLATION PROCEDURE 1. INSTALL REAR WIPER MOTOR AND BRACKET ASSEMBLY (a) Attach the 2 guides and temporally install the rear wiper motor and bracket assembly with the 3 bolts. (b) Tighten the ...