Toyota 4Runner: Diagnosis System
DIAGNOSIS SYSTEM
1. CHECK DLC3
(a) Check the DLC3 (See page .gif)
).
2. CHECK INDICATOR
(a) When a malfunction is detected in the Safety Connect system, the manual (SOS)
switch red indicator on the manual (SOS) switch illuminates to inform the driver
of the malfunction (See page ).
Terminals Of Ecu
TERMINALS OF ECU
1. CHECK DCM (TELEMATICS TRANSCEIVER)
Text in Illustration
*a
Connector color: Blue
(to Telephone antenna)
*b
Connector color: Gray
...
Dtc Check / Clear
DTC CHECK / CLEAR
1. DTC CHECK/CLEAR (Using the Techstream)
(a) Check DTC:
(1) Connect the Techstream to the DLC3.
(2) Turn the ignition switch to ON.
(3) Turn the Techstream on.
(4) Enter the f ...
Other materials about Toyota 4Runner:
Removal
REMOVAL
PROCEDURE
1. REMOVE GENERATOR ASSEMBLY
(a) Remove the generator assembly (See page
).
2. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM
3. DISCONNECT DISCHARGE HOSE SUB-ASSEMBLY
(a) Remove the bolt and disconnect the discharge hos ...
Installation
INSTALLATION
CAUTION / NOTICE / HINT
HINT:
A bolt without a torque specification is shown in the standard bolt chart (See
page ).
PROCEDURE
1. INSTALL FRONT BUMPER BRACKET SUB-ASSEMBLY LH
(a) Install the front bumper bracket sub-assembly LH with the 2 ...
0.0071