DIAGNOSTIC TROUBLE CODE CHART
HINT:
If a trouble code is output during the DTC check, inspect the trouble areas listed for that code. For details of the code, refer to the "See page" below.
Power Steering System
DTC Code |
Detection Item |
Return-to-normal |
See page |
---|---|---|---|
C1541 |
Vehicle Speed Signal |
After normal confirmation |
|
C1544 |
High Engine Revolution Signal |
After normal confirmation |
|
C15F0 |
VFC Solenoid Circuit |
Ignition switch turned to ON again |
|
C15F1 |
Steering Angle Sensor Circuit |
After normal confirmation |
|
U0100 |
Lost Communication with ECM / PCM "A" |
After CAN communication system returns to normal condition or ignition switch turned to ON again |
|
U0126 |
Lost Communication with Steering Angle Sensor Module |
After CAN communication system returns to normal condition or ignition switch turned to ON again |
|
U0129 |
Lost Communication with Brake System Control Module |
After CAN communication system returns to normal condition or ignition switch turned to ON again |
|
Driver Side Power Window Auto Up / Down Function does not Operate with Power
Window Master Switch
DESCRIPTION
If the auto up/down function does not operate, the cause may be one or more of
the following:
The ECU in the power window regulator motor determines that the power
window regulator motor has not been initialized.
The master switc ...
System Description
SYSTEM DESCRIPTION
1. WINDOW DEFOGGER SYSTEM DESCRIPTION
The thin heater wires of the defogger system are attached to the rear window
and defog the rear window surface quickly. The system only operates when the back
door power window is closed. The indic ...