Toyota 4Runner: Diagnostic Trouble Code Chart
DIAGNOSTIC TROUBLE CODE CHART
|
DTC Code |
Detection Item |
See page |
|---|---|---|
|
11 |
Short in Motor LH |
|
|
12 |
Short in Motor RH |
|
|
21 |
Short to GND in Motor LH Circuit |
|
|
22 |
Open in Motor LH Circuit |
|
|
23 |
Short to GND in Motor RH Circuit |
|
|
24 |
Open in Motor RH Circuit |
|
|
25 |
Short to Battery in Motor RH Circuit |
|
|
26 |
Short to Battery in Motor LH Circuit |
|
|
31 |
Short to GND in Hall Effect Sensor Power Circuit |
|
|
32 |
Short to Battery in Hall Effect Sensor Power Circuit |
|
|
41 |
Hall Effect Sensor LH Pulse |
|
|
42 |
Hall Effect Sensor RH Pulse |
|
|
43 |
Hall Effect Sensor LH |
|
|
44 |
Hall Effect Sensor RH |
|
|
51 |
Side Auto Step LH Stowing Timeout |
|
|
52 |
Side Auto Step LH Deploying Timeout |
|
|
53 |
Side Auto Step RH Stowing Timeout |
|
|
54 |
Side Auto Step RH Deploying Timeout |
|
|
55 |
Motor LH Spining Freely |
|
|
56 |
Motor RH Spining Freely |
|
|
61 |
ECU Circuit |
|
|
62 |
Motor LH Current Senser |
|
|
63 |
Motor RH Current Senser |
|
|
64 |
Motor LH Over Temperature |
|
|
65 |
Motor RH Over Temperature |
|
.gif)
Dtc Check / Clear
DTC CHECK / CLEAR
1. CHECK DTC
(a) Turn the side auto step switch assembly to OFF.
(b) Connect the Techstream to the DLC3.
(c) Turn the ignition switch to ON.
(d) Turn the Techstream on.
(e) Ent ...
Motor LH Over Temperature (64,65)
DESCRIPTION
When the side auto step controller ECU assembly detects the overheating in the
system, it stops the operation of the automatic running board.
DTC No.
Detection Co ...
Other materials about Toyota 4Runner:
Speaker Circuit
DESCRIPTION
If there is a short in a speaker circuit, the radio and display receiver assembly
detects it and stops output to the speakers.
Thus sound cannot be heard from the speakers even if there is no malfunction
in the radio and display receiver asse ...
How To Proceed With Troubleshooting
CAUTION / NOTICE / HINT
HINT:
The wireless door lock control system troubleshooting procedures are
based on the premise that the power door lock control system is operating
normally. Check the power door lock control system first before troub ...
0.0069