DISASSEMBLY
PROCEDURE
1. REMOVE BACK DOOR OPENER SWITCH ASSEMBLY
2. REMOVE NO. 2 BACK DOOR OUTSIDE GARNISH
(a) Detach the 2 clips and No. 2 back door outside garnish.
3. REMOVE LICENSE PLATE LIGHT ASSEMBLY
4. REMOVE BACK DOOR OUTSIDE GARNISH SEAL
(a) Remove the back door outside garnish seal.
5. REMOVE NO. 1 BACK DOOR GARNISH RETAINER (w/o Smart Key System)
(a) Remove the screw and No. 1 back door garnish retainer.
6. REMOVE BACK DOOR CONTROL SWITCH (w/ Smart Key System)
Problem Symptoms Table
PROBLEM SYMPTOMS TABLE
HINT:
Use the table below to help determine the cause of problem symptoms. If multiple
suspected areas are listed, the potential causes of the symptoms are listed in order
of probability in the "Suspected Area" column of ...
Installation
INSTALLATION
PROCEDURE
1. INSTALL HOOD LOCK ASSEMBLY
(a) Apply MP grease to the sliding areas of the hood lock assembly.
(b) Connect the hood lock control cable assembly.
(c) Connect the connector.
(d) Install the hood lock assembly with the 3 ...