Toyota 4Runner: Disassembly

Toyota 4Runner Service Manual / Vehicle Exterior / Exterior Panels / Trim / Rear Spoiler / Disassembly

DISASSEMBLY

PROCEDURE

1. REMOVE REAR NO. 1 SPOILER PROTECTOR

(a) Remove the rear No. 1 spoiler protector.

2. REMOVE REAR NO. 2 SPOILER PROTECTOR

HINT:

Use the same procedure to remove the rear No. 2 spoiler protector on the other side.

(a) Remove the rear No. 2 spoiler protector.

3. REMOVE REAR SPOILER PROTECTOR LH

HINT:

Use the same procedure to remove the rear spoiler protector on the other side.

(a) Remove the rear spoiler protector.

4. REMOVE CENTER STOP LIGHT ASSEMBLY

5. REMOVE NO. 3 BACK DOOR WIRE

(a) Detach the clamp and remove the No. 3 back door wire.

Removal

REMOVAL PROCEDURE 1. REMOVE REAR NO. 1 SPOILER COVER (a) Detach the 4 clips and remove the rear No. 1 spoiler cover. 2. REMOVE REAR SPOILER SUB-ASSEMBLY (a) Remove the 4 grommets and ...

Reassembly

REASSEMBLY CAUTION / NOTICE / HINT HINT: When installing the rear spoiler protector, heat the rear spoiler surface using a heat light. Standard: Item Temperature ...

Other materials about Toyota 4Runner:

Data List / Active Test
DATA LIST / ACTIVE TEST 1. READ DATA LIST HINT: Using the Techstream to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very usefu ...

Operation Check
OPERATION CHECK 1. NOTICES WHEN CHECKING (a) Wireless door lock/unlock function: This function operates only when the vehicle is in its initial condition (the following 3 conditions are met). No key is inserted into the ignition key cylinder. ...