Toyota 4Runner: Disassembly

Toyota 4Runner Service Manual / Vehicle Exterior / Exterior Panels / Trim / Side Moulding / Disassembly

DISASSEMBLY

CAUTION / NOTICE / HINT

HINT:

Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.

PROCEDURE

1. REMOVE FRONT FENDER OUTSIDE MOULDING PAD LH

(a) Remove the front fender outside moulding pad.

2. REMOVE REAR DOOR UPPER OUTSIDE MOULDING PAD

(a) Remove the rear door upper outside moulding pad.

3. REMOVE REAR DOOR NO. 1 MOULDING PAD

(a) Remove the rear door No. 1 moulding pad.

4. REMOVE NO. 1 QUARTER PANEL MOULDING PAD

(a) Remove the No. 1 quarter panel moulding pad.

Components

COMPONENTS ILLUSTRATION ILLUSTRATION ILLUSTRATION ILLUSTRATION ILLUSTRATION ...

Removal

REMOVAL CAUTION / NOTICE / HINT HINT: Use the same procedure for both the RH and LH sides. The procedure listed below is for the LH side. PROCEDURE 1. REMOVE FRONT FENDER MUDGUA ...

Other materials about Toyota 4Runner:

Calibration
CALIBRATION 1. DESCRIPTION (a) After replacing VSC-related components, clearing and reading the sensor calibration data is necessary. (b) Follow the chart to perform calibration. Part Replaced Necessary Operation Ma ...

Touch Panel Switch does not Function
PROCEDURE 1. CHECK MULTI-DISPLAY (a) Check if there is any foreign matter caught between the display and exterior frame of the multi-display. OK: No foreign matter is caught between the display and exterior frame of the m ...