DISASSEMBLY
CAUTION / NOTICE / HINT
PROCEDURE
1. REMOVE OUTER MIRROR LH
(a) Put protective tape around the outer mirror LH.
(b) Using a moulding remover, detach the 2 claws of the outer mirror LH as shown in the illustration. Text in Illustration
|
|
(c) Using a moulding remover, detach the 2 claws of the outer mirror LH as shown in the illustration. Text in Illustration
|
|
(d) Disconnect the connector and remove the outer mirror LH. |
|
2. REMOVE OUTER MIRROR HOLE COVER LH
(a) Detach the 5 claws to remove the outer mirror hole cover LH. |
|
3. REMOVE OUTER MIRROR COVER LH
(a) Detach the 7 claws to remove the outer mirror cover LH. |
|
4. REMOVE SIDE TURN SIGNAL LIGHT ASSEMBLY LH (w/ Side Turn Signal Light)
5. REMOVE OUTER MIRROR LIGHT ASSEMBLY BULB (w/ Side Turn Signal Light)
(a) Remove the outer mirror light assembly bulb. |
|
Removal
REMOVAL
CAUTION / NOTICE / HINT
CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.
HINT:
Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
PROCEDURE
1. PRECAUTI ...
Data Signal Circuit between Navigation Receiver Assembly and Stereo Jack Adapter
DESCRIPTION
The No. 1 stereo jack adapter assembly sends the sound data signal or image data
signal from a USB device to the navigation receiver assembly via this circuit.
WIRING DIAGRAM
PROCEDURE
1.
CHECK HARNESS AND CONNECTOR ( ...