DISASSEMBLY
PROCEDURE
1. REMOVE NO. 1 POWER OUTLET SOCKET ASSEMBLY
2. REMOVE NO. 1 POWER OUTLET SOCKET COVER
3. REMOVE REAR CONSOLE END PANEL
(a) Detach the 4 clips and 4 claws to remove the rear console end panel. |
|
(b) Disconnect the 2 power outlet socket assembly connectors.
4. REMOVE NO. 3 POWER OUTLET SOCKET ASSEMBLY
5. REMOVE CENTER POWER OUTLET SOCKET COVER
6. REMOVE CONSOLE BOX REGISTER ASSEMBLY
(a) Detach the 4 claws to remove the console box register assembly. |
|
7. REMOVE CONSOLE COMPARTMENT DOOR SUB-ASSEMBLY
(a) Remove the 6 screws and console compartment door sub-assembly. |
|
8. REMOVE CONSOLE COMPARTMENT DOOR LOCK SUB-ASSEMBLY
(a) Remove the 2 screws and console compartment door lock sub-assembly. |
|
9. REMOVE CONSOLE COMPARTMENT DOOR HINGE SUB-ASSEMBLY
(a) Remove the 4 screws. |
|
(b) Using a screwdriver, detach the 6 claws to remove the console compartment inner door.
Text in Illustration
*1 |
Protective Tape |
HINT:
Tape the screwdriver tip before use.
(c) Remove the 4 screws and console compartment door hinge sub-assembly. |
|
10. REMOVE CONSOLE CUP HOLDER BOX
(a) Remove the 6 screws and console cup holder box. |
|
11. REMOVE BACK DOOR POWER WINDOW REGULATOR SWITCH ASSEMBLY
12. REMOVE SEAT HEATER SWITCH (w/ Seat Heater System)
13. REMOVE SWITCH BASE
(a) Remove the 2 screws and switch base. |
|
14. REMOVE SHIFTING HOLE COVER SUB-ASSEMBLY (for VF2A)
(a) Detach the 6 claws to remove the shifting hole cover sub-assembly. |
|
15. REMOVE FRONT UPPER CONSOLE PANEL GARNISH
(a) for VF2A:
(1) Detach the 6 claws to remove the front upper console panel garnish. Text in Illustration
|
|
(b) for 2WD, for VF2BM, VF4BM:
(1) Detach the 10 claws to remove the front upper console panel garnish.
Text in Illustration
*A |
for 2WD |
*B |
for VF2BM, VF4BM |
16. REMOVE NO. 2 BOX BOTTOM MAT (for 2WD)
(a) Detach the 4 claws to remove the No. 2 box bottom mat. |
|
17. REMOVE TRANSFER POSITION SWITCH (for VF2BM)
18. REMOVE TRANSFER POSITION SWITCH (for VF4BM)
Operation Check
OPERATION CHECK
1. CHECK PANEL & STEERING SWITCH
HINT:
The radio and display receiver assembly panel switches and steering
switches are checked in the following procedure.
Illustrations may differ from the actual vehicle screen depending ...
Adjustment
ADJUSTMENT
CAUTION / NOTICE / HINT
HINT:
Centering bolts are used to mount the door hinge to the vehicle body
and door. The door cannot be adjusted with the centering bolts installed.
Substitute the centering bolts with standard bolts when ...