DISASSEMBLY
PROCEDURE
1. REMOVE SHIFT LEVER CAP
2. REMOVE POSITION INDICATOR HOUSING ASSEMBLY
(a) Detach the 4 claws and remove the floor shift position indicator housing. |
|
3. REMOVE INDICATOR LIGHT WIRE SUB-ASSEMBLY
(a) Detach the wire connector clamp from the position indicator housing. |
|
(b) Rotate the indicator light wire socket counterclockwise to align the key part and remove the wire.
(c) Remove the cap and bulb from the indicator light wire socket. |
|
4. REMOVE SHIFT LOCK CONTROL ECU SUB-ASSEMBLY
(a) Disconnect the shift lock solenoid connector from the shift lock control ECU.
(b) Detach the 3 claws and remove the shift lock control ECU from the transmission floor shift. |
|
The indicator and buzzer
When a sensor detects an obstacle, the direction of the obstacle is indicated
and the buzzer sounds.
Sensor operation and distance to an obstacle
The system operates when the vehicle approaches an obstacle, as shown by the
following table.
1. Rear cor ...
Precaution
PRECAUTION
1. IGNITION SWITCH EXPRESSION
HINT:
The type of ignition switch used on this model differs according to the specifications
of the vehicle. The expressions listed in the table below are used in this section.
Expression
Ign ...