Toyota 4Runner: Disassembly

Toyota 4Runner Service Manual / Drivetrain / Axle And Differential / Front Axle Hub(for 4wd) / Disassembly

DISASSEMBLY

PROCEDURE

1. REMOVE FRONT AXLE WITH ABS ROTOR BEARING ASSEMBLY LH

(a) Gently fix the front axle hub in a vise between aluminum plates.

(b) Using SST, remove the bearing.

SST: 09710-30021

09710-03051

SST: 09950-40011

09951-04020

09952-04010

09953-04020

09954-04010

09955-04061

09957-04010

09958-04011

2. REMOVE FRONT AXLE HUB OIL SEAL LH

(a) Using a screwdriver, remove the front axle hub oil seal.

Removal

REMOVAL CAUTION / NOTICE / HINT HINT: Use the same procedure for the RH and LH sides. The procedure listed below is for the LH side. PROCEDURE 1. REMOVE FRONT WHEEL 2. REMOVE D ...

Reassembly

REASSEMBLY PROCEDURE 1. INSTALL FRONT AXLE HUB OIL SEAL LH (a) Using SST and a press, press in a new oil seal. SST: 09608-36010 SST: 09950-70010 09951-07100 NOTICE: Do not ...

Other materials about Toyota 4Runner:

On-vehicle Inspection
ON-VEHICLE INSPECTION PROCEDURE 1. CHECK SHIFT LOCK OPERATION (a) Move the shift lever to P. (b) Turn the ignition switch off. (c) Check that the shift lever cannot be moved from P. (d) Turn the ignition switch to on (IG), depress the brake pedal and che ...

Back Door Speaker
Components COMPONENTS ILLUSTRATION Removal REMOVAL CAUTION / NOTICE / HINT HINT: Use the same procedure for the RH and LH sides. The procedure listed below is for the LH side. PROCEDURE 1. DISCONNECT CABLE FROM NEGATIVE BATTERY ...