DISPOSAL
PROCEDURE
1. DISPOSE OF CENTER CONTROL ABSORBER ASSEMBLY LH
(a) Using a drill, make a hole in the cylinder as shown in the illustration to discharge the gas inside. |
|
(b) Remove the flare nut.
(c) Drain suspension fluid.
Occupant Classification ECU Malfunction (B1795)
DESCRIPTION
DTC B1795 is stored when a malfunction is detected in the occupant classification
ECU.
Troubleshoot DTC B1771 first when both DTCs B1771 and B1795 are present.
DTC Code
DTC Detection Condition
Trouble Area
...
Installation with LATCH system (rear/second row seats only)
Installing on the rear seats (vehicles without third row seats)
Fold the seatback while pulling the seatback angle adjustment lever. Return
the seatback and secure it at the first lock position.
Type A
Latch the hooks of the lower straps onto the LATC ...