Toyota 4Runner manuals

Toyota 4Runner: Door Courtesy Light(for Front Door)

Toyota 4Runner Service Manual / Vehicle Interior / Lighting (int) / Door Courtesy Light(for Front Door)

Components

COMPONENTS

ILLUSTRATION


Removal

REMOVAL

CAUTION / NOTICE / HINT

HINT:

  • Use the same procedure for the RH and LH sides.
  • The procedure listed below is for the LH side.

PROCEDURE

1. REMOVE FRONT DOOR LOWER FRAME BRACKET GARNISH LH


2. REMOVE NO. 2 DOOR INSIDE HANDLE BEZEL LH


3. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH


4. REMOVE FRONT DOOR GLASS WEATHERSTRIP INNER LH


5. REMOVE COURTESY LIGHT ASSEMBLY

(a) Detach the 2 claws and remove the light.


(b) Disconnect the connector.

(c) Remove the bulb.

Installation

INSTALLATION

CAUTION / NOTICE / HINT

HINT:

  • Use the same procedure for the RH and LH sides.
  • The procedure listed below is for the LH side.

PROCEDURE

1. INSTALL COURTESY LIGHT ASSEMBLY

(a) Install the bulb.

(b) Connect the connector.

(c) Attach the 2 claws to install the light.

2. INSTALL FRONT DOOR GLASS WEATHERSTRIP INNER LH


3. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH


4. INSTALL NO. 2 DOOR INSIDE HANDLE BEZEL LH


5. INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH LH


Lighting (int)
...

Door Courtesy Light(for Rear Door)
Components COMPONENTS ILLUSTRATION Removal REMOVAL CAUTION / NOTICE / HINT HINT: Use the same procedure for the RH and LH sides. The procedure listed below is for the LH side. ...

Other materials about Toyota 4Runner:

LVDS Signal Malfunction (from Extension Module) (B1532)
DESCRIPTION DTC No. DTC Detection Condition Trouble Area B1532 When one of the conditions below is met: Stereo component tuner assembly is/was not connected while the ignition sw ...

Installation
INSTALLATION CAUTION / NOTICE / HINT HINT: Use the same procedure for the RH and LH sides. The procedure listed below is for the LH side. A bolt without a torque specification is shown in the standard bolt chart (See page ). PROC ...

© 2016-2024 | www.to4runner.net

0.0259