Components
COMPONENTS
ILLUSTRATION
Removal
REMOVAL
CAUTION / NOTICE / HINT
HINT:
PROCEDURE
1. REMOVE REAR DOOR INSIDE HANDLE BEZEL LH
2. REMOVE REAR DOOR TRIM BOARD SUB-ASSEMBLY LH
3. REMOVE REAR DOOR GLASS WEATHERSTRIP INNER LH
4. REMOVE COURTESY LIGHT ASSEMBLY
(a) Detach the 2 claws and remove the light. |
|
(b) Disconnect the connector.
(c) Remove the bulb.
Installation
INSTALLATION
CAUTION / NOTICE / HINT
HINT:
PROCEDURE
1. INSTALL COURTESY LIGHT ASSEMBLY
(a) Install the bulb.
(b) Connect the connector.
(c) Attach the 2 claws to install the light.
2. INSTALL REAR DOOR GLASS WEATHERSTRIP INNER LH
3. INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY LH
4. INSTALL REAR DOOR INSIDE HANDLE BEZEL LH
TRAC OFF Indicator Light Remains ON
DESCRIPTION
The skid control ECU is connected to the combination meter via the CAN communication
system. Pressing the VSC OFF switch turns off traction control and pressing and
holding this switch turns off traction control and VSC. If TRAC control turns ...
System Diagram
SYSTEM DIAGRAM
Input and Output Signal of Each ECU
Transmitting ECU (Transmitter)
Receiving ECU (Receiver)
Signal
Communication Method
Power management control ECU
Steering lock actuato ...