DTC CHECK / CLEAR
1. CHECK DTC
(a) Turn the ignition switch off.
(b) Connect the Techstream to the DLC3.
(c) Turn the ignition switch to ON.
(d) Turn the Techstream on.
(e) Enter the following menus: Chassis / PPS / Trouble codes.
(f) Read the DTCs following the display on the Techstream.
(g) Refer to Diagnostic Trouble Code Chart for DTC information (See page ).
2. CLEAR DTC
(a) Turn the ignition switch off.
(b) Connect the Techstream to the DLC3.
(c) Turn the ignition switch to ON.
(d) Turn the Techstream on.
(e) Enter the following menus: Chassis / PPS / Trouble codes.
(f) Clear the DTCs by following the display on the Techstream.
(g) Turn the ignition switch off.
(h) Disconnect the Techstream from the DLC3.
Door Courtesy Switch Circuit
DESCRIPTION
The side auto step controller ECU assembly receives the door open/closed signal
from each door courtesy light switch via the side auto step switch assembly.
WIRING DIAGRAM
CAUTION / NOTICE / HINT
HINT:
Inspection should be performed on the ...
Blower Motor Circuit
DESCRIPTION
The blower with fan motor sub-assembly operates according to signals from the
air conditioning amplifier assembly. The blower with fan motor sub-assembly speed
signals are transmitted by changes in the duty ratio.
Duty Ratio:
The duty rati ...