Toyota 4Runner: Dtc Check / Clear

Toyota 4Runner Service Manual / Vehicle Exterior / Sliding Roof / Convertible / Sliding Roof System / Dtc Check / Clear

DTC CHECK / CLEAR

1. CHECK DTC

(a) Connect the Techstream to the DLC3.

(b) Turn the ignition switch to ON.

(d) Enter the following menus: Body Electrical / Sliding Roof / Trouble Codes.

(e) Check the DTCs.

2. CLEAR DTC

(a) Connect the Techstream to the DLC3.

(b) Turn the ignition switch to ON.

(d) Enter the following menus: Body Electrical / Sliding Roof / Trouble Codes.

(e) Clear the DTCs.

Terminals Of Ecu

TERMINALS OF ECU 1. CHECK SLIDING ROOF DRIVE GEAR SUB-ASSEMBLY (SLIDING ROOF ECU) (a) Disconnect the S10 sliding roof drive gear sub-assembly connector. (b) Measure the resistance and voltage acc ...

Data List / Active Test

DATA LIST / ACTIVE TEST 1. READ DATA LIST HINT: Using the Techstream to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing ...

Other materials about Toyota 4Runner:

Illumination Circuit
DESCRIPTION Power is supplied to the navigation receiver assembly and steering pad switch assembly illumination when the light control switch is in the tail or head position. WIRING DIAGRAM CAUTION / NOTICE / HINT NOTICE: The vehicle is equipp ...

Sensor (Motor) Failure (B2341,B2344)
DESCRIPTION When the sliding roof drive gear sub-assembly detects a motor malfunction and the sliding roof operation is stopped, DTC B2341 is stored. When the sliding roof drive gear sub-assembly detects a gear position malfunctio ...