DTC CHECK / CLEAR
1. CHECK DTC
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / (desired system) / Trouble Codes.
(e) Check the details of the DTC(s)
2. CLEAR DTC
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / (desired system) / Trouble Codes.
(e) Clear the DTCs.
Messages displayed on the accessory meter
Depending on switch operation, one of the following messages may appear on
the accessory meter to provide guidance on transfer mode selection etc:
Multi-terrain Select is temporarily canceled when
The front-wheel drive control lever or switch is shift ...
Occupant Classification ECU Malfunction (B1795)
DESCRIPTION
DTC B1795 is stored when a malfunction is detected in the occupant classification
ECU.
Troubleshoot DTC B1771 first when both DTCs B1771 and B1795 are present.
DTC Code
DTC Detection Condition
Trouble Area
...