Toyota 4Runner manuals

Toyota 4Runner: Electrical Key Oscillator(for Outside Luggage Compartment)

Toyota 4Runner Service Manual / Vehicle Interior / Theft Deterrent / Keyless Entry / Electrical Key Oscillator(for Outside Luggage Compartment)

Components

COMPONENTS

ILLUSTRATION


Installation

INSTALLATION

PROCEDURE

1. INSTALL ELECTRICAL KEY ANTENNA

(a) Install the electrical key antenna with the bolt.

Torque:

8.0 N·m {82 kgf·cm, 71 in·lbf}


(b) Connect the connector.

Removal

REMOVAL

PROCEDURE

1. REMOVE ELECTRICAL KEY ANTENNA

(a) Disconnect the connector.


(b) Remove the bolt and electrical key antenna.

Removal
REMOVAL PROCEDURE 1. REMOVE REAR NO. 2 SEAT ASSEMBLY (a) Remove the rear No. 2 seat assembly (See page ). 2. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM COVER (w/o Deck Board) 3. REMOVE NO. 1 DECK ...

Electrical Key Oscillator(for Rear Floor)
...

Other materials about Toyota 4Runner:

Washer Nozzle(for Front Side)
Components COMPONENTS ILLUSTRATION On-vehicle Inspection ON-VEHICLE INSPECTION PROCEDURE 1. INSPECT WASHER NOZZLE SUB-ASSEMBLY (a) With the engine running, check the position that the washer fluid hits the windshield. Standard: Washer fluid h ...

Steering Lock Position Signal Circuit Malfunction (B2285)
DESCRIPTION The power management control ECU and steering lock actuator (steering lock ECU) are connected by a cable and the LIN communication line. This DTC is stored when the steering lock position signal information from the cable and the steering lock ...

© 2016-2022 | www.to4runner.net

0.1156