Toyota 4Runner: Emergency flashers
Use the emergency flashers if the vehicle malfunctions or is involved in an accident.
Press the switch to flash all the turn signal lights. To turn them off, press the switch once again.
NOTICE
To prevent battery discharge
Do not leave the emergency flashers on longer than necessary when the engine is not running.
If your vehicle needs to be towed
If towing is necessary, we recommend having your vehicle towed by your
Toyota dealer or a commercial towing service, using a lift-type truck or flatbed
truck.
Use a safety chain system for all to ...
Other materials about Toyota 4Runner:
Removal
REMOVAL
PROCEDURE
1. REMOVE REAR AXLE SHAFT LH
(a) Remove the rear axle shaft LH (See page
).
2. REMOVE REAR AXLE SHAFT RH
HINT:
Use the same procedure described for the LH side.
3. REMOVE PROPELLER SHAFT ASSEMBLY
(a) Remove the propeller shaft asse ...
Removal
REMOVAL
PROCEDURE
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-)
battery terminal to disable the SRS system.
NOTICE:
When disconnecting the cable, some systems ne ...
0.0267