DESCRIPTION
The smart key system uses the combination meter buzzer to perform various vehicle interior warnings. When the conditions of each warning are met, the certification ECU sends a buzzer signal to the combination meter assembly, and the combination meter buzzer sounds.
CAUTION / NOTICE / HINT
NOTICE:
PROCEDURE
1. |
CHECK COMBINATION METER ASSEMBLY (OPERATION) |
(a) Turn the engine switch on (IG). Place a weight of 20 kg (44.0 lb) on the passenger seat to cause the passenger seat belt warning light to blink.
(b) When driving the vehicle at 15 km/h (9.3 mph) or more, check that the seat belt warning buzzer sounds to inform that the passenger seat belt is not fastened.
HINT:
The smart key system sounds the buzzer built into the combination meter for indoor warnings. This buzzer is also used for the seat belt warning system. Therefore, the operation of the combination meter buzzer can be checked by checking if the buzzer sounds to inform that the seat belt is not fastened.
OK:
Combination meter buzzer sounds.
OK |
REPLACE CERTIFICATION ECU |
NG |
GO TO METER / GAUGE SYSTEM |
Installation
INSTALLATION
PROCEDURE
1. INSTALL INDOOR NO. 2 ELECTRICAL KEY ANTENNA ASSEMBLY
(a) Attach the 2 claws to install the indoor No. 2 electrical key antenna.
(b) Connect the connector.
2. INSTALL NO. 1 LUGG ...
Precaution
PRECAUTION
1. IGNITION SWITCH EXPRESSION
HINT:
The type of ignition switch used on this model differs according to the specifications
of the vehicle. The expressions listed in the table below are used in this section.
Expression
Ign ...