Use the four-wheel drive control switch to select the following transfer modes:
1. H4F (high speed position)
Use this for normal driving on dry hard-surfaced roads. This position gives greater economy, quietest ride and least wear.
2. H4L (high speed position, center differential locked)
Use this for driving only on tracks that permit the tires slide, like offroad, icy or snow-covered roads.
3. L4L (low speed position, center differential locked)
Use this for maximum power and traction. Use “L4L” for climbing or descending steep hills, off-road driving, and hard pulling in sand, mud or deep snow.
4. Center differential lock indicator
5. Low speed four-wheel drive indicator
Dtc Check / Clear
DTC CHECK / CLEAR
1. CHECK DTC
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / (desired system) / Trouble Codes.
(e) Read the DTCs.
2. CLEAR DTC
(a ...
High Mounted Stop Light Assembly
Components
COMPONENTS
ILLUSTRATION
Removal
REMOVAL
PROCEDURE
1. REMOVE CENTER STOP LIGHT ASSEMBLY
(a) Remove the 2 screws and stop light.
(b) Disconnect the connector.
Inspection
INSPECTION ...