Toyota 4Runner manuals

Toyota 4Runner: Freeze Frame Data

FREEZE FRAME DATA

1. CHECK FREEZE FRAME DATA

(a) Connect the Techstream to the DLC3.

(b) Turn the ignition switch to ON.

(c) Turn the Techstream on.

(d) Enter the following menus: Body Electrical / Navigation System / Trouble Codes.

(e) Select a DTC to display its Freeze Frame Data.

2. LIST OF FREEZE FRAME DATA

(a) Refer to "Data List / Active Test" (See page ).


Dtc Check / Clear
DTC CHECK / CLEAR 1. CHECK DTC (CHECK USING TECHSTREAM) (a) Connect the Techstream to the DLC3. (b) Turn the ignition switch to ON. (c) Turn the Techstream on. (d) Enter the following menus: Body ...

Data List / Active Test
DATA LIST / ACTIVE TEST 1. DATA LIST NOTICE: In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when dec ...

Other materials about Toyota 4Runner:

Installation
INSTALLATION PROCEDURE 1. INSTALL OCCUPANT CLASSIFICATION ECU (a) Attach the claw to install the occupant classification ECU. NOTICE: If the occupant classification ECU has been dropped, or there are any cracks, dents or other defects i ...

Removal
REMOVAL PROCEDURE 1. REMOVE REAR NO. 1 SPOILER COVER (a) Detach the 4 clips and remove the rear No. 1 spoiler cover. 2. REMOVE REAR SPOILER SUB-ASSEMBLY (a) Remove the 4 grommets and 4 bolts. ...

© 2016-2024 | www.to4runner.net

0.0285