Toyota 4Runner manuals

Toyota 4Runner: Front Axle Hub Bolt

Components

COMPONENTS

ILLUSTRATION


Replacement

REPLACEMENT

CAUTION / NOTICE / HINT

HINT:

  • Use the same procedure for the RH and LH sides.
  • The procedure listed below is for the LH side.

PROCEDURE

1. REMOVE FRONT WHEEL

2. REMOVE DISC BRAKE CYLINDER ASSEMBLY LH


3. REMOVE FRONT DISC


4. REMOVE FRONT AXLE HUB BOLT LH


(a) Using SST and a screwdriver or equivalent to hold the axle hub, remove the front axle hub bolt.

SST: 09611-12010

Text in Illustration

*1

Nut

*a

Turn

*b

Hold

NOTICE:

Do not damage the threads of the hub bolt.

5. INSTALL FRONT AXLE HUB BOLT LH


(a) Insert a new hub bolt.

(b) Temporarily install a washer and hub nut to the hub bolt as shown in the illustration.

Text in Illustration

*1

Washer

*2

Nut

*a

Turn

*b

Hold

NOTICE:

Install a hub nut to prevent damage to the hub bolt.

(c) Using a screwdriver or equivalent to hold the hub, turn the hub nut until the bottom surface of the hub bolt head touches the axle hub.

(d) Remove the hub nut and washer.

NOTICE:

Do not damage the threads of the hub bolt.

6. INSTALL FRONT DISC


7. INSTALL DISC BRAKE CYLINDER ASSEMBLY LH


8. INSTALL FRONT WHEEL

Torque:

for aluminum wheel :

103 N·m {1050 kgf·cm, 76 ft·lbf}

for steel wheel :

112 N·m {1142 kgf·cm, 83 ft·lbf}

Inspection
INSPECTION PROCEDURE 1. INSPECT DIFFERENTIAL LOCK SYSTEM (a) Inspect the indicator light. (1) Check that the indicator light lights up approximately 1 second after the ignition switch is turne ...

Front Axle Hub(for 2wd)
...

Other materials about Toyota 4Runner:

Dtc Check / Clear
DTC CHECK / CLEAR 1. CHECK DTC (a) Connect the Techstream to the DLC3. (b) Turn the ignition switch to ON. (c) Turn the Techstream on. (d) Enter the following menus: Body Electrical / Main Body / Trouble Codes. (e) Check for DTCs. 2. CLEAR DTC (a) Conn ...

Automatic transmission
Select a shift position appropriate for the driving conditions. Shifting the shift lever Vehicles without a smart key system: While the engine switch is in the “ON” position, move the shift lever with the brake pedal depressed. Vehicles with a s ...

© 2016-2024 | www.to4runner.net

0.0273