Components
COMPONENTS
ILLUSTRATION
Removal
REMOVAL
PROCEDURE
1. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
2. REMOVE BLOWER WITH FAN MOTOR SUB-ASSEMBLY
(a) Detach the clamp.
(b) Disconnect the connector.
(c) Remove the 3 screws and motor. |
|
Installation
INSTALLATION
PROCEDURE
1. INSTALL BLOWER WITH FAN MOTOR SUB-ASSEMBLY
(a) Install the motor with the 3 screws.
(b) Connect the connector.
(c) Attach the clamp.
2. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
Red Indicator Remains On
DESCRIPTION
This means that the DCM (Telematics Transceiver) detects a malfunction in the
Safety Connect and stores a DTC.
PROCEDURE
1.
CHECK FOR DTC
(a) Turn the ignition switch off.
(b) Connect the Techstream to the DLC ...
How To Proceed With Troubleshooting
CAUTION / NOTICE / HINT
HINT:
Use these procedures to troubleshoot the engine immobiliser system.
*: Use the Techstream.
PROCEDURE
1.
VEHICLE BROUGHT TO WORKSHOP
NEXT
...