Reassembly
ComponentsInstallation
INSTALLATION
PROCEDURE
1. CONNECT NO. 2 STEERING INTERMEDIATE SHAFT SUB-ASSEMBLY
(a) Align the matchmarks on the No. 2 steering intermediate shaft and power steering
gear.
(b) Install the bolt.
Torque:
36 N·m {367 kgf·cm, 27 ft·lbf}
2. INSTALL NO. ...
Rear Speed Sensor
Components
COMPONENTS
ILLUSTRATION
Removal
REMOVAL
PROCEDURE
1. REMOVE REAR WHEEL
2. REMOVE REAR SPEED SENSOR LH
(a) Disconnect the speed sensor connector.
(b) Remove the nut and speed sensor. ...