Toyota 4Runner: Front Seat Inner Belt Assembly
Components
COMPONENTS
ILLUSTRATION
ILLUSTRATION
Installation
INSTALLATION
CAUTION / NOTICE / HINT
HINT:
- Use the same procedure for the RH and LH sides.
- The procedure listed below is for the LH side.
PROCEDURE
1. INSTALL FRONT SEAT INNER BELT ASSEMBLY LH
|
(a) Install the front seat inner belt with the nut. Torque: 42 N·m {428 kgf·cm, 31 ft·lbf} NOTICE: Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding parts of the front seat adjuster. Text in Illustration
|
|
(b) for Driver Side:
Connect the connector and attach the 4 clamps.
(c) for Passenger Side:
Connect the connector and attach the clamp.
2. INSTALL FRONT SEAT ASSEMBLY LH
(a) for Manual Seat:
Install the front seat assembly LH (See page .gif)
).
(b) for Power Seat:
Install the front seat assembly LH (See page
).
Removal
REMOVAL
CAUTION / NOTICE / HINT
HINT:
- Use the same procedure for the RH and LH sides.
- The procedure listed below is for the LH side.
PROCEDURE
1. REMOVE FRONT SEAT ASSEMBLY LH
(a) for Manual Seat:
Remove the front seat assembly LH (See page .gif)
).
(b) for Power Seat:
Remove the front seat assembly LH (See page
).
2. REMOVE FRONT SEAT INNER BELT ASSEMBLY LH
(a) for Driver Side:
Disconnect the connector and detach the 4 clamps.
(b) for Passenger Side:
Disconnect the connector and detach the clamp.
|
(c) Remove the nut and front seat inner belt. |
|
Seat Belt
...
Other materials about Toyota 4Runner:
Data List / Active Test
DATA LIST / ACTIVE TEST
1. DATA LIST
HINT:
Using the Techstream to read the Data List allows the values or states of switches,
sensors, actuators and other items to be read without removing any parts. This non-intrusive
inspection can be very useful bec ...
Inspection
INSPECTION
PROCEDURE
1. INSPECT TIE ROD END SUB-ASSEMBLY
(a) Install the nut.
(b) Flip the ball joint stud back and forth 5 times as shown in the illustration.
(c) Using a torque wrench, turn the nut co ...
0.0233